NewClaim a free social report
instagram analytics
Similar Accounts:
followers
1.23M
impressions
142M
likes
602K
comments
18.7K
posts
352
engagement
0.404%
emv
$3.01M
Average per post
403K

Key Metrics

Distributions

Top Content

We used to frame around the fireplace up to the vaulted ceiling with full height studs.  Fireblocking and firestopping took longer and we had to be very selective in what material we used.  It's much more efficient to frame standard height walls with a 3/4" (min) "lid" and then frame up to the ceiling.  No fire blocking needed, the top plates take care of that. @dewalttough tools keep us clutter free i.e. no hoses or cords in the way. Cordless doesn't = weak  #DEWALTPartner #DEWALTTough *Disclaimer: Depicted use is for illustrative purposes only.  Always follow manufacturer’s operating instructions and warnings
11.8M
1.12K
21
3mo ago
dewalttough
We used to frame around the fireplace up to the vaulted ceiling with full height studs. Fireblocking and firestopping took longer and we had to be very selective in what material we used. It's much more efficient to frame standard height walls with a 3/4" (min) "lid" and then frame up to the ceiling. No fire blocking needed, the top plates take care of that. @dewalttough tools keep us clutter free i.e. no hoses or cords in the way. Cordless doesn't = weak #DEWALTPartner #DEWALTTough *Disclaimer: Depicted use is for illustrative purposes only. Always follow manufacturer’s operating instructions and warnings
Chug! Chug! Chug! Chug! Shoutout to @johnbuildsit for this 20V MAX* Transfer Pump demo.
10.7M
3.00K
92
5mo ago
dewalttough
Chug! Chug! Chug! Chug! Shoutout to @johnbuildsit for this 20V MAX* Transfer Pump demo.
It's day 2 at World of Concrete and we're nailing it.

#DEWALTWOC2026 #DEWALTTough #DEWALT #WOC2026
7.76M
1.52K
42
4mo ago
dewalttough
It's day 2 at World of Concrete and we're nailing it. #DEWALTWOC2026 #DEWALTTough #DEWALT #WOC2026
I do a lot of hole drilling thru metal brackets and don’t always hit perfectly.  This greatly increases the chances of either breaking a bit or worse, hurting your wrists.  The New @dewalttough Drill with anti rotation takes care of that worry.  Not only can I drill effortlessly thru my columns, but I can do it safely #DEWALTTough #DEWALTPartner
7.31M
5.79K
62
1mo ago
dewalttough
I do a lot of hole drilling thru metal brackets and don’t always hit perfectly. This greatly increases the chances of either breaking a bit or worse, hurting your wrists. The New @dewalttough Drill with anti rotation takes care of that worry. Not only can I drill effortlessly thru my columns, but I can do it safely #DEWALTTough #DEWALTPartner
There’s nothing like a perfect fit

Link in bio. 20V MAX* Copper Swage Tool Kit – DCE450D1
#DEWALTTough #DEWALT
7.07M
34.6K
447
3mo ago
dewalttough
There’s nothing like a perfect fit Link in bio. 20V MAX* Copper Swage Tool Kit – DCE450D1 #DEWALTTough #DEWALT
I’ll always be a fan of hardwood treads, but what are your thoughts on vinyl treads? 

#construction #dewaltpartner #dewalttough #ad #carpentry
6.34M
68.6K
577
2mo ago
dewalttough
I’ll always be a fan of hardwood treads, but what are your thoughts on vinyl treads? #construction #dewaltpartner #dewalttough #ad #carpentry
We've had enough of winter. How about you?

Link in bio. 🆕 60V MAX* 16.5" String Trimmer Kit - DCST975Y2 + 🆕 60V MAX* 60V MAX* Curved Shaft Edger Kit - DCED470Y2

#DEWALTTough #DEWALT #WorkAnywhereAnytime
6.26M
253
4
2mo ago
dewalttough
We've had enough of winter. How about you? Link in bio. 🆕 60V MAX* 16.5" String Trimmer Kit - DCST975Y2 + 🆕 60V MAX* 60V MAX* Curved Shaft Edger Kit - DCED470Y2 #DEWALTTough #DEWALT #WorkAnywhereAnytime
Stop chasing tools. Start getting work done. One tool. Multiple tasks. No broken flow. Worth checking out if you’re bouncing between installs. @dewalttough #DEWALTPartner #DEWALTTough

*Disclaimer: Depicted use is for illustrative purposes only. Always follow manufacturer’s operating instructions and warnings
5.93M
2.21K
26
2mo ago
dewalttough
Stop chasing tools. Start getting work done. One tool. Multiple tasks. No broken flow. Worth checking out if you’re bouncing between installs. @dewalttough #DEWALTPartner #DEWALTTough *Disclaimer: Depicted use is for illustrative purposes only. Always follow manufacturer’s operating instructions and warnings
Coming soon…🤫
5.69M
5.15K
352
2mo ago
dewalttough
Coming soon…🤫
Get just about anywhere with the DEWALT 20V DCD803 multi-head driver. The interchangeable heads make it easy to adapt without constantly switching tools, and in tighter spaces that flexibility matters.
If you’re doing device installs, finish work, or anything in tight spaces, this setup is worth a look @dewalttough 
#DEWALTPartner #DEWALTTough #ElectricalTools #ToolSetup
3.92M
1.92K
26
2mo ago
dewalttough
Get just about anywhere with the DEWALT 20V DCD803 multi-head driver. The interchangeable heads make it easy to adapt without constantly switching tools, and in tighter spaces that flexibility matters. If you’re doing device installs, finish work, or anything in tight spaces, this setup is worth a look @dewalttough #DEWALTPartner #DEWALTTough #ElectricalTools #ToolSetup
⛽ has exited the chat

Link in bio. 60V MAX* Cordless Brushless Blower Kit - DCBL777Y1
#DEWALTTough #DEWALT
3.79M
672
35
2mo ago
dewalttough
⛽ has exited the chat Link in bio. 60V MAX* Cordless Brushless Blower Kit - DCBL777Y1 #DEWALTTough #DEWALT
How would you measure up? 

#DEWALTWOC2026 #DEWALTTough #DEWALT #WOC2026
3.74M
947
36
4mo ago
dewalttough
How would you measure up? #DEWALTWOC2026 #DEWALTTough #DEWALT #WOC2026
Pro Tip: Finger Scribe. I used to wrap my index finger in tape for this trick, but the @DeWalttough tape measure eliminates the need.  Ride the tape against the sheet good, and scribe away, the finger slot on the tape measure allows me to keep the correct measurement.  Skip the chalk line and scribe instead.  #DEWALTPartner #DEWALTTough
2.43M
1.02K
46
2mo ago
dewalttough
Pro Tip: Finger Scribe. I used to wrap my index finger in tape for this trick, but the @DeWalttough tape measure eliminates the need. Ride the tape against the sheet good, and scribe away, the finger slot on the tape measure allows me to keep the correct measurement. Skip the chalk line and scribe instead. #DEWALTPartner #DEWALTTough
No your eyes aren't playing tricks on you. The 20V MAX* XR® Ratchet and XR POWERSTACK™ battery really are this compact. Just ask @johnbuildsit. #DEWALTTough #DEWALT
2.18M
3.38K
91
9mo ago
dewalttough
No your eyes aren't playing tricks on you. The 20V MAX* XR® Ratchet and XR POWERSTACK™ battery really are this compact. Just ask @johnbuildsit. #DEWALTTough #DEWALT
Got a big job? @johnbuilds it knows, the 20V MAX* GRABO LIFTER helps you lift smart.
2.12M
1.40K
48
5mo ago
dewalttough
Got a big job? @johnbuilds it knows, the 20V MAX* GRABO LIFTER helps you lift smart.
Break-free from pneumatic nailers with our most compact cordless 20V MAX* XR® 18GA Brad Nailer. No Air. No Hassles. No Compromise.™

†Bare tool (with magazine attached), based on volume (length x width x height)
2.10M
4.32K
379
2mo ago
dewalttough
Break-free from pneumatic nailers with our most compact cordless 20V MAX* XR® 18GA Brad Nailer. No Air. No Hassles. No Compromise.™ †Bare tool (with magazine attached), based on volume (length x width x height)
Our Anthem. Crank it up and get to work 🔊. #DEWALTTough #DEWALT
1.92M
3.15K
188
7mo ago
dewalttough
Our Anthem. Crank it up and get to work 🔊. #DEWALTTough #DEWALT
We're starting out strong at World of Concrete with the new DEWALT POWERSHIFT™ 12 in. Cutoff Saw.

#DEWALTWOC2026 #DEWALTTough #DEWALT #WOC2026
1.78M
1.81K
79
4mo ago
dewalttough
We're starting out strong at World of Concrete with the new DEWALT POWERSHIFT™ 12 in. Cutoff Saw. #DEWALTWOC2026 #DEWALTTough #DEWALT #WOC2026
There's nothing like a smooth finish. Just ask @VanTheFabricator

Link in bio. ATOMIC™ 20V MAX* Grinders
#DEWALTTough #DEWALT
1.77M
2.60K
48
1mo ago
dewalttough
There's nothing like a smooth finish. Just ask @VanTheFabricator Link in bio. ATOMIC™ 20V MAX* Grinders #DEWALTTough #DEWALT
With the 12in Dual Bevel Sliding Cordless Mitersaw, we can keep the job moving with clean cuts all day long @dewalttough #DEWALTPartner #DEWALTTough #mitersaw #DEWALT
1.75M
1.85K
24
1mo ago
dewalttough
With the 12in Dual Bevel Sliding Cordless Mitersaw, we can keep the job moving with clean cuts all day long @dewalttough #DEWALTPartner #DEWALTTough #mitersaw #DEWALT

DEWALT POWER TOOLS (@dewalttough) Instagram Stats & Analytics

DEWALT POWER TOOLS (@dewalttough) has 1.23M Instagram followers with a 0.40% engagement rate over the past 12 months. Across 352 posts, DEWALT POWER TOOLS received 602K total likes and 141M impressions, averaging 1.71K likes per post. This page tracks DEWALT POWER TOOLS's performance metrics, top content, and engagement trends — updated daily.

DEWALT POWER TOOLS (@dewalttough) Instagram Analytics FAQ

How many Instagram followers does DEWALT POWER TOOLS have?+
DEWALT POWER TOOLS (@dewalttough) has 1.23M Instagram followers as of June 2026.
What is DEWALT POWER TOOLS's Instagram engagement rate?+
DEWALT POWER TOOLS's Instagram engagement rate is 0.40% over the last 12 months, based on 352 posts.
How many likes does DEWALT POWER TOOLS get on Instagram?+
DEWALT POWER TOOLS received 602K total likes across 352 posts in the last 12 months, averaging 1.71K likes per post.
How many Instagram impressions does DEWALT POWER TOOLS get?+
DEWALT POWER TOOLS's Instagram content generated 141M total impressions over the last 12 months.